12 VDC motor
powered by vehicle or mobile power pack
Vehicle Receiver Hitch:
Class II (1.25"),
Class III (2")
Horizontal Hitch Adjustment:
4 positions (3"
range)
Maximum Width Chair/Scooter:
27"
Maximum Wheelbase Chair/Scooter:
35"
Minimum Extension Beyond Receiver:
41.5" w/power
chair, 17" (folded)
Platform Adjustability (Hitch to
Platform):
2.25" - 6.25"
The Heavy-Duty Car-Go-Mate™ Power Chair Lift will
fit most medium and large vehicles. Combined scooter
and lift weights must not exceed the tongue weight
limits of your hitch or vehicle. Check with your
vehicle manufacturer for hitch tongue weight limits.
The Heavy-Duty Car-GoMate™ Power Chair Lift reduces
your hitch ground clearance by no more than ½".
Automatically secures the power chair to the
platform using a unique patented, positive-lock
docking system
Robust welded steel construction
Available in Class II (1.25") or Class III
(2") models
Easy to install, adjust, and can be
reinstalled if you purchase a new vehicle
Powered by your vehicle's battery
Weight sensitive platform automatically
folds when lifted without power chair
Automatic tilt for added ground clearance
and weight transfer
Adjusts to accomodate a wide range of power
chairs
Platform wheel wells and docking mechanism
assure proper power chair positioning
Lighted license plate bracket and courtesy
lights illuminate lift and trunk areas
Keyed operation for added security
Single rocker switch control
Manual crank in case of power failure
Attractive and durable metallic gray powder
coated finish
Fits on most vehicles
Automatically folds up when not in use
Limited lifetime warranty guarantees you
satisfaction
Many car companies reimburse all or part of
the cost with the purchase of a new vehicle
Class III Application with a Pride 1113 ATS Power Chair
The Heavy-Duty Car-Go-Mate™ Power Chair Lift attaches to your
receiver hitch. Once your power chair has been outfitted with the
appropriate docking bracket, simply drive onto the platform. As the lift
is operated, the power chair is latched and securely held without
additional tiedowns. Its weight sensitive platform automatically folds
up and out of the way when not lifting a power chair.
The Car-Go-Mate™ Power Chair Lift incorporates several features
which are not available on similar competitive products.
The patented redundant drive screw attachment incorporates a
“secondary locking nut” which eliminates any possibility of the
screw failing due to a motor malfunction and eliminates any
possibility of the lift falling to the ground.
The new four- point contact greatly increases the rigidity of
the platform in the stowed position, which reduces the amount of
“wobble” between the lift and the vehicle providing a more secure
ride for the power chair.
Field replaceable actuator motor: Service friendly .
Automatic platform folding: Enables a spring loaded cam to
activate and fold the platform when the weight is less than 50lbs.
Hitch adjustment: Provides service flexibility.
Lighted license plate: Increases the visibility of the lift.
Courtesy light: Provides for additional visibility.
Patented automatic latching: Assures positive docking of the
power chair.
Patented guiding feature of the plow: Enables the power chair to
align itself correctly with minimal consumer control.
Ground clearance: When the plow is attached to most all power
chairs, sufficient ground clearance remains.
The Heavy-Duty Car-GoMate™ Power Chair Lift is
ATRS-Ready™ -