Battery Pack

• The addition of the power source eliminates the need for wires to be run from the lift to the automobile battery when installed, thus reducing installation time, cost, and complexity
• All of Pride's power lifts (except the Olympian) have the option of selecting their own 12 volt power supply which easily recharges by plugging the unit into any standard wall outlet. Each charge lasts approximately 150 cycles*
• Lifts may be wired to the vehicle's power supply upon request.
• By using the battery pack option, the lifts can be easily transferred from one vehicle to another

*Tested under ideal conditions using 325 lb. Scooter. Cycles per charge may vary depending on various factors such as scooter or power chair weight and climate.

Multi-Purpose Battery Pack

• Industry first and industry exclusive!
• Easy installation
• Integrated smart charging system, will not drain your vehicle’s battery
• Charges the mobility device from the lift as you drive
• No hardwiring, just plug into auxiliary power outlet
• Trickle charge battery every time vehicle turns on
• Converts vehicle’s 12v system to a mobility device’s 24v system
• Compatible with Backpacker Series

In-House Charger

• Charge your Pride Lift Battery Pack in your home by plugging into a standard 120 VAC electrical outlet
• Color changing LED shows when the Battery Pack is fully charged
• Mounting base plate makes it easy to charge anywhere

Hitch Extension

• The hitch extension tube adds an additional 4" of clearance between vehicle and lift while maintaining a weight capacity of 325 lbs.
• This helps provide you with extra clearance if your vehicle posses a recessed hitch.

Hitch Riser

• Because some vehicles have lower hitch points than others, the Universal Hitch Riser allows you to raise your hitch mounted lift an appropriate distance above the level of your hitch point.
• This helps to avoid scraping on steep inclines.
• Simply slide the Universal Hitch Riser into your trailer hitch receiver tube and secure.
• Adds 4 inches of additional height.

Weather Cover - Power Chair

• The Power Chair Weather Breaker Cover helps keep the outside elements away from of your power chair while traveling.
• The durable one-piece cover protects electronic components and keeps your seat clean and dry.

NOTE: When used on an outside lift system, the weather covers must be secured not only with the drawstring, but also with a heavy gauge nylon cord threaded through the grommets and secured to the mobilitydevice. The drawstring closure should only be used by itself during stationary storage, such as on a porch or in a garage.

Weather Cover - Scooter

• This one-piece cover helps keep the outside elements away from your scooter while traveling
• It shields your whole scooter, protecting the tiller and electronics while keeping the seat clean and dry.

NOTE: When used on an outside lift system, the weather covers must be secured not only with the drawstring, but also with a heavy gauge nylon cord threaded through the grommets and secured to the mobilitydevice. The drawstring closure should only be used by itself during stationary storage, such as on a porch or in a garage.